I'm going to order a pertronix ignitor kit and went to the website and they ask for the id tag info on the dist to determine the right kit. I see the tag on the dist, but i can't get my body laid out on top of that engine one more time to get close enough to read the numbers. I redid the top end this summer and every single part was standard so i'm assuming the dist is too. does anyone have the standard dist # or the pertronix kit number for a standard 1960 292? thnx in advance. Bart

 

57-73 FORD should be 1281

 

thanks a million Tedster!

 

The LOM dizzy takes a different Pertronix than the non-LOM.

 

I'm unclear, didn't LOM go bye bye in 1956?

 

1956 was the last year for that Dist. My '56 has it but in '57 they had vacuum and mechanical advance, big upgrade I read everyone does is swap a '57 and up dist.

 

I have trouble remembering what is what.


My 65 Mustang with a 200 still had the LOM.