I have a fuel leak at the hard line fittings going from the banjo bolt to the back of the heads. Do you need to remove the turbo to get to these?

Thanks..........

 

Nope.just get the replacement seals.
its not a big deal reallyy

 

Fordman, not the banjo bolt, but the fittings on the back of the heads. Wouldn't the turbo be in the way?

 

A stubby wrench and ballerina flexibility and you should be ok. Turbos are a pain to get off. Undo your dp for a little extra room. The orings for those are square. When I needed them I got them from ford. The service manager just handed me a bunch(I know, it shocked me too)