Hi all, long time lurker, first time poster. I've learned a whole lot from all of you on here.
I have a question that I can't seem to find an answer to. I have a 1999 "early build" pre-3/99 F250 and need to know what to torque the track bar to. I do know that the later models with the newer larger bolt track bar are to be torqued to around 400 ft/lbs, but after having no luck searching and searching for what to torque mine to I've decided to just ask here. Thanks!

 

I think Haynes states it at around 170 ft lb.

 

129 lb ft both upper and lower..per the book..cd etc.