Tested MAF sensor, please help me interprate
#1
Tested MAF sensor, please help me interprate
Hey, tested my MAF sensor today, and heres what I got
1.2V at warm idle
up to 3.7V at WOT
I think i may have noticed a dead spot as I advanced the throttle, but im not sure.
Whats this all mean?!?!?! lol I sprayed the MAF down with maf cleaner and reinstalled for now, still trying to figure out my weak/hard starting issue....
On a side note, i noticed that when i stab the throttle multiple times to advance the rpms i start to get puffs of black smoke.... Not enough air flow? Too much fuel?
1.2V at warm idle
up to 3.7V at WOT
I think i may have noticed a dead spot as I advanced the throttle, but im not sure.
Whats this all mean?!?!?! lol I sprayed the MAF down with maf cleaner and reinstalled for now, still trying to figure out my weak/hard starting issue....
On a side note, i noticed that when i stab the throttle multiple times to advance the rpms i start to get puffs of black smoke.... Not enough air flow? Too much fuel?
#3
Try over here for some help Part 1 -Ford MAF Sensor Test (P0102, P0103, P1100, P1101)
Testing the MAF
Thread
Thread Starter
Forum
Replies
Last Post
rustbucket64f100
2.6, 2.8, 2.9, 4.0 & SOHC 4.0 V6
1
01-25-2004 03:09 PM