61-66 f100 2wd 390 install help
#16
Once a center engine mount and new trans mount is added the old bell housing mount is not needed. It can be removed by cutting flush with the inner frame rails or complete removal.
No funky spacers or anything needed to set the driveline angles.
If you are worried about flex add some boxing plates to the area.
Garbz
No funky spacers or anything needed to set the driveline angles.
If you are worried about flex add some boxing plates to the area.
Garbz
Thread
Thread Starter
Forum
Replies
Last Post
dave_r
1961 - 1966 F-100 & Larger F-Series Trucks
22
07-14-2011 10:35 PM
bhauna89
1948 - 1956 F1, F100 & Larger F-Series Trucks
8
06-26-2011 08:58 AM