Seeking correct part number for Clutch Release Equalizer Bar; 1963 F35 > Number Dummy, please!
#1
Seeking correct part number for Clutch Release Equalizer Bar; 1963 F35 > Number Dummy, please!
F35CR330225
1963
F350
292 V8
Borg-Warner T-98 4-Speed
Napco Conversion
Found out one side of the Clutch Release Equalizer Bar is destroyed [rounded out/ metal broken/ previous welds]...
Will have to fabricate, but would appreciate verifying the exact part number, for future reference & possible acquirement.
_ _ _ _ - 7528 - _
Number Dummy, can you fill in the blanks?
Very much appreciated!
1963
F350
292 V8
Borg-Warner T-98 4-Speed
Napco Conversion
Found out one side of the Clutch Release Equalizer Bar is destroyed [rounded out/ metal broken/ previous welds]...
Will have to fabricate, but would appreciate verifying the exact part number, for future reference & possible acquirement.
_ _ _ _ - 7528 - _
Number Dummy, can you fill in the blanks?
Very much appreciated!
#2
1961/62 F350/600 & B500/600 (B: School Bus) & F700 292 // 1961/64 F100/250 120" wheelbase 4WD // 1963/64 F350/750 & B500/750.
KAMA OBSOLETE PARTS in East Bethel MN has 2 = 763-434-0123.
OBSOLETE RELIABLE PARTS in Nashville GA has 2 = 229-686-5101.
NOS PARTS LTD in Waxahachie TX has 6 = 972-937-2201.
-----------------------------------------------------------------
C1TT-7528-B =
GREEN SALES CO. in Cincinnati OH has 2 = 800-543-4959.
#4
Bill,
Would you mind providing the complete Part Number for;
7507
> Which is the Outer Mounting Bracket, w/ Ball Mount...
... we found out ours is well-worn.
Also, trying to confirm the 2-Piece Bushings required...
... we come up with 0.829 Diameter for the Ball, upon which the Bushings ride.
Appreciate your great insight...
... actually purchased the Z-Bar, from Kama Obsolete Parts!
Again, thank you - for your invaluable consideration!
Would you mind providing the complete Part Number for;
7507
> Which is the Outer Mounting Bracket, w/ Ball Mount...
... we found out ours is well-worn.
Also, trying to confirm the 2-Piece Bushings required...
... we come up with 0.829 Diameter for the Ball, upon which the Bushings ride.
Appreciate your great insight...
... actually purchased the Z-Bar, from Kama Obsolete Parts!
Again, thank you - for your invaluable consideration!
#7
Trending Topics
#9
1961/64 F100/250 4WD with 120" Wheelbase & F350/700.
See Chad's post #5.
------------------------
4) C2TZ-7517-A .. Split Bronze Clutch Equalizer Bar Bushing / .996" O.D. x .847" I.D. x .58" long / Obsolete
1961/64 F100/750 / 1963/64 N500/750.
KAMA OBSOLETE PARTS has 2.
RPN PARTS in Erie PA has 4 = 888-864-9305.
CARPENTER NOS OBSOLETE PARTS in Concord NC has 47 = 800-476-9653.
Thread
Thread Starter
Forum
Replies
Last Post
LaRidah
1961 - 1966 F-100 & Larger F-Series Trucks
6
10-15-2015 11:56 PM
beckman
1967 - 1972 F-100 & Larger F-Series Trucks
2
05-25-2014 07:06 PM