lookin for a way to put 3td brake light up above back glass with out cutting BIG hole's any help 1966 short bed thanks

 

Hey Smitty,
There is an outfit that makes the third light that attaches with Suction cups or adhesive to the back window. Made for Model A's but should work for you if you are okay with it being in the window, not above.
BrakeLighter™

Rich

 

Just google "Third Brake Light" a million to choose. Summit racing also carries them. This is what I have.
https://www.summitracing.com/int/par...2220/overview/

 

...surface mount. Three small holes, two for the screws and one for a small wire pigtail. I can go back and find where I got it, or you can just search for them. Since I was stripping the cab down to repaint anyway, I made a small backing plate with nuts and tack welded it inside the cab, so I could use machine screws to mount the light. I don't like using sheet metal screws, but you could do that if you wanted to make a quicker install.

 

that looks good and you got it were ??? THX

 

Smitty:
Sorry for the delay...out of town. I got this light from spoilerlights.com. Its a surface mount light, that I painted the housing. They have a good variety, just search by type you're looking for. Good luck.

 

thx looks good