1995 F150 Wheel Bearing Torque Specs
Posting Guru
Joined: Jan 2002
Posts: 1,346
Likes: 8
From: Baltimore
If you have manual locking hubs.
Tighten the nut to 50 ft lbs while you move the hub back and forth to seat the bearings.
Back the nut off then retighten to 15 ft. lbs. End play should be 0 to .006 inches.
Tighten the nut to 50 ft lbs while you move the hub back and forth to seat the bearings.
Back the nut off then retighten to 15 ft. lbs. End play should be 0 to .006 inches.
Last edited by F150xlt; Jun 17, 2006 at 06:49 PM.
….
Thread
Thread Starter
Forum
Replies
Last Post
Rocky Mountain F150
1987 - 1996 F150 & Larger F-Series Trucks
14
Oct 4, 2015 02:29 PM
johnsteffy
1994.5 - 1997 7.3L Power Stroke Diesel
3
Sep 23, 2010 10:21 AM
