Whats the pcd on a ford f350 1955 daul wheel
Thread Starter
|
Senior User
Joined: Mar 2008
Posts: 377
Likes: 1
From: robin hood country UK
Whats the pcd on a ford f350 1955 daul wheel
Hi again would you know whats the wheel pcd on my 1955 ford f350 twin rear wheel.Its six sud 16 inc wheels.Is there any modern truck wheels that could fit.I would like to have some nice chrome wheels in the future.Really greatfull for the help from Pete in the UK.
Marmon-Herrington Man
Joined: Jul 2005
Posts: 11,986
Likes: 444
From: Central Illinois
The Pitch Circle Diameter (PCD) of your wheels is 7.25". By "modern wheel" you no doubt mean one piece tubeless wheels. Finding tubeless replacements for the 6 lug x 7.25" bolt pattern wheels is difficult in the US, much less in the UK. This bolt pattern in a "stud piloted" dually wheel was not uncommon back in the late 1950s or 1960s, but finding them used today is difficult. They were made in 17.5" and 19.5" sizes rather than in your 16" size. I know where a set of 17.5s sits on a truck in a yard near Salt Lake City, UT, but shipping would be horrible.
Your best option is to have a local wheel company pull the centers from your wheels and remount them into new tubeless outer rims. Then you'd be able to have them chromed locally as well. Hope that helps. Stu
Your best option is to have a local wheel company pull the centers from your wheels and remount them into new tubeless outer rims. Then you'd be able to have them chromed locally as well. Hope that helps. Stu
Thread
Thread Starter
Forum
Replies
Last Post
John Pelucci
1948 - 1956 F1, F100 & Larger F-Series Trucks
11
Feb 28, 2015 03:16 PM
zimsoundz
1999 - 2016 Super Duty
3
Mar 8, 2012 12:26 AM
