Building a 410?
Thread Starter
|
Senior User
Joined: Feb 2002
Posts: 433
Likes: 4
From: Breckenridge, Minn.
Building a 410?
For the past four years I have had the desire to build a 410 for Joey's truck. They are hard to find and was able to locate two but the people never seem to get them out of the vehicles. I decided to settle for a 390 but that has problems as well. I am contemplating getting either a SCAT Crank or an Eagle crank to complete the engine as a 410. I also plan on putting on EFI with this engine and am wondering if I will need a crank position sensor when using the entire EEC and operating parts out of the donor 460? Any thought and ideas would be appreciated.
Gear Up
Gear Up
Cargo Master
Joined: Mar 2001
Posts: 2,759
Likes: 70
From: Elk River, MN
You might get a quicker response to engine build questions on another place in the forum. There is a listing called" FE-FT Big Block lower down that includes 390 and 410 motors. Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
Killgore
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
22
Mar 24, 2013 11:24 PM
Gear Up
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
6
Mar 15, 2010 05:46 AM
73 ford guy
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
29
Feb 12, 2010 08:51 PM
