Clutch rod to clutch pedal plastic retainer
Thread Starter
|
Senior User
Joined: Jan 2009
Posts: 173
Likes: 0
Clutch rod to clutch pedal plastic retainer
Was driving home last night in my 96 ranger and the clutch pedal when to floor as i was coming to a red light. I had to just hold the brakes and let the motor stall out. The Clutch Master cylinder rod came loose from the clutch pedal. There is a plastic bushing/retainer that holds the rod to the pedal that looks like it broke. Does anybody know if you can buy just the retainer and where can i get it? Dealer maybe. Any part numbers?
Thanks
Steve
Thanks
Steve
Junior User
Joined: Aug 2009
Posts: 94
Likes: 0
From: Las Vegas
I would like to know this as well. As you know I just replaced the master cylinder along with everything else, and no matter what I tried to get that clip off in one piece so I could remove the rod from the pedal nothing worked so I just broke it. I havent had any issues with the rod coming off yet in the past week but if you can buy just the clip I would definitely like to put a new one on so I never have to worry about the rod coming off of the pedal.
Thread
Thread Starter
Forum
Replies
Last Post
timmyboy76
1999 - 2003 7.3L Power Stroke Diesel
4
May 19, 2016 11:06 AM
milehieagle
1987 - 1996 F150 & Larger F-Series Trucks
1
Jan 1, 2015 10:05 AM
cavitation
1999 - 2003 7.3L Power Stroke Diesel
22
Jul 14, 2010 12:24 PM
