Can this be fixed?
Thread Starter
|
Posting Guru
Joined: Feb 2002
Posts: 2,404
Likes: 3
From: Cleveland, WI USA
Can this be fixed?
[updated:LAST EDITED ON 11-Mar-02 AT 11:46 AM (EST)]This is part of the spool out of the 9" rear end on my 78 F150.
http://www.brayarch.com/~kevin/truck/trkimgs/0309diff02.jpg
Can I get just this part or should I get the whole spool? Anyone know where I could get one?
Thanks!
K.
http://www.brayarch.com/~kevin/truck/trkimgs/0309diff02.jpg
Can I get just this part or should I get the whole spool? Anyone know where I could get one?
Thanks!
K.
Post Fiend
Joined: Jan 2002
Posts: 5,859
Likes: 7
From: USA
Can this be fixed?
Ouch!!!!!!!
You can get just that part,But if you want my opinion get a whole new rear out of another truck man! that is some serious damage ,no telling what else is messed up!
Rich
Ford Trucks Built Tough!
not with rocks
Watch out "X" Mayor of Truckville
You can get just that part,But if you want my opinion get a whole new rear out of another truck man! that is some serious damage ,no telling what else is messed up!
Rich
Ford Trucks Built Tough!
not with rocks
Watch out "X" Mayor of Truckville
Thread Starter
|
Posting Guru
Joined: Feb 2002
Posts: 2,404
Likes: 3
From: Cleveland, WI USA
Can this be fixed?
>all I want to know is how did that break?
That's a good question. It's actually the cover for the carrier (not a "spool" as I called it). I was taking the 3rd member off to fix an oil leak when I saw it. Everything else in the rear looks good. All the teeth on all the gears look perfectly fine, and the bearings seem OK too. I have to take apart the rest of the carrier for closer examination. Something else HAS to be broken.
Fortunately, I found a barrel full of these at the local bone yard. He wants $50 a piece. The posi ones are $150.
K.
That's a good question. It's actually the cover for the carrier (not a "spool" as I called it). I was taking the 3rd member off to fix an oil leak when I saw it. Everything else in the rear looks good. All the teeth on all the gears look perfectly fine, and the bearings seem OK too. I have to take apart the rest of the carrier for closer examination. Something else HAS to be broken.
Fortunately, I found a barrel full of these at the local bone yard. He wants $50 a piece. The posi ones are $150.
K.
Junior User
Joined: Sep 2001
Posts: 74
Likes: 0
Can this be fixed?
What you have there is a very common prob with the cast iron hat.Some of these hats are better than others but all the cast iron ones are prone to breakage.
Your best bet is to go with an aftermarket steel hat. you will never break another one again..
Your best bet is to go with an aftermarket steel hat. you will never break another one again..
Thread Starter
|
Posting Guru
Joined: Feb 2002
Posts: 2,404
Likes: 3
From: Cleveland, WI USA
Can this be fixed?
>What you have there is a very common prob with the cast iron
>hat.Some of these hats are better than others but all the
>cast iron ones are prone to breakage.
>Your best bet is to go with an aftermarket steel hat.
Sorry to revive an old post, but do you have any idea where I can get an aftermarket "hat" for the carrier?
TIA
K.
>hat.Some of these hats are better than others but all the
>cast iron ones are prone to breakage.
>Your best bet is to go with an aftermarket steel hat.
Sorry to revive an old post, but do you have any idea where I can get an aftermarket "hat" for the carrier?
TIA
K.
Elder User
Joined: Sep 2000
Posts: 936
Likes: 0
From: Bay area
Trending Topics
Senior User
Joined: Feb 2001
Posts: 180
Likes: 0
From: Powell RIver Canada
Can this be fixed?
I had the exact same thing happen to me. I used ot have a limited slip in my 9". I blew it right apart, I did the same thing as the photo and blew both the bearing retainers right in half too!!!
I went out and got a whole new third member form the junkyard and switched the ring and pinion with the one from my truck, and i just put a mini spool in it a couple days ago.
I went out and got a whole new third member form the junkyard and switched the ring and pinion with the one from my truck, and i just put a mini spool in it a couple days ago.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
