Need Help!!
Thread Starter
|
New User
Joined: Oct 2006
Posts: 18
Likes: 0
From: Minnesota
Need Help!!
I've changed my transmission from a 4 speed to a C-6 Automatic and now need to change drive shafts (length changed approx. 10" shorter). Can anyone tell me if there is a drive shaft out there for this?? The drive shaft I have was originally from a 1958 Ford F-100. Worked fine when I put my 429 with 4 speed but not at all now for reasons listed above. Any help is appreciated.
Super Moderator
Joined: Apr 2004
Posts: 34,503
Likes: 2,820
Read their q&a:
http://www.thrashdriveshaft.com/index.html
I think you should check the Yellow Pages and have one made. You are not going to find a 1958 shaft that you could trust. Any other shaft will be pure guesswork.
The shaft goes, it does a lot of damage, and if your fuel tank is next to it, God help you.
http://www.thrashdriveshaft.com/index.html
I think you should check the Yellow Pages and have one made. You are not going to find a 1958 shaft that you could trust. Any other shaft will be pure guesswork.
The shaft goes, it does a lot of damage, and if your fuel tank is next to it, God help you.
Thread
Thread Starter
Forum
Replies
Last Post
BrotherMabe
1967 - 1972 F-100 & Larger F-Series Trucks
11
Sep 10, 2013 08:51 PM
cliffs750
335 Series- 5.8/351M, 6.6/400, 351 Cleveland
10
Jan 16, 2012 04:14 AM
Black Ford XLT
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
1
Jan 11, 2011 07:05 PM
stinkfist
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
13
Feb 14, 2008 08:26 PM
