Replacing reverse bulbs on a 99 navigator??
Hotshot
Joined: Jan 2004
Posts: 19,762
Likes: 1,079
From: St Louis
Bulb — Reversing Lamp (Navigator)
Removal and Installation
µ 1. Remove the liftgate pull handle.
1 Remove the screws.
2 Remove the liftgate pull handle.
µ 2. Remove the liftgate trim panel.
3. Remove the liftgate watershield.
µ 4. Disconnect the reversing lamp.
µ 5. Remove the reversing lamp bulb.
6. To install, reverse the removal procedure.
If you need the procedure with its drawings, PM your e-mail address to me and I will create a pdf file for you with the relvent sectionof the manual.
Steve
Removal and Installation
µ 1. Remove the liftgate pull handle.
1 Remove the screws.
2 Remove the liftgate pull handle.
µ 2. Remove the liftgate trim panel.
3. Remove the liftgate watershield.
µ 4. Disconnect the reversing lamp.
µ 5. Remove the reversing lamp bulb.
6. To install, reverse the removal procedure.
If you need the procedure with its drawings, PM your e-mail address to me and I will create a pdf file for you with the relvent sectionof the manual.
Steve
Last edited by projectSHO89; Sep 20, 2006 at 08:18 AM.
Thread Starter
|
Junior User
Joined: Mar 2005
Posts: 51
Likes: 0
Thanks alot steve.
Originally Posted by projectSHO89
Bulb — Reversing Lamp (Navigator)
Removal and Installation
µ 1. Remove the liftgate pull handle.
1 Remove the screws.
2 Remove the liftgate pull handle.
µ 2. Remove the liftgate trim panel.
3. Remove the liftgate watershield.
µ 4. Disconnect the reversing lamp.
µ 5. Remove the reversing lamp bulb.
6. To install, reverse the removal procedure.
If you need the procedure with its drawings, PM your e-mail address to me and I will create a pdf file for you with the relvent sectionof the manual.
Steve
Removal and Installation
µ 1. Remove the liftgate pull handle.
1 Remove the screws.
2 Remove the liftgate pull handle.
µ 2. Remove the liftgate trim panel.
3. Remove the liftgate watershield.
µ 4. Disconnect the reversing lamp.
µ 5. Remove the reversing lamp bulb.
6. To install, reverse the removal procedure.
If you need the procedure with its drawings, PM your e-mail address to me and I will create a pdf file for you with the relvent sectionof the manual.
Steve
