power steering relief valve location on 99 ranger 3.0 l engine
power steering relief valve location on 99 ranger 3.0 l engine
Post Fiend
Joined: Jan 2003
Posts: 9,748
Likes: 16
From: Connecticut
Hi lee,
If there is too much pressure in the PS system, fluid will blow out the pinhole in the PS reservoir cap. Other than that, I'm not familiar with a pressure relief valve on the Ranger PS system.
If there is too much pressure in the PS system, fluid will blow out the pinhole in the PS reservoir cap. Other than that, I'm not familiar with a pressure relief valve on the Ranger PS system.
Thread
Thread Starter
Forum
Replies
Last Post
RAMPAGE_F350
1999 - 2003 7.3L Power Stroke Diesel
19
Nov 15, 2005 03:46 PM
DuckRyder
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
4
Sep 8, 2003 04:55 AM
