ZF6 Cooler Line Pinched
Thread Starter
|
Mountain Pass
Joined: Aug 2016
Posts: 175
Likes: 37
ZF6 Cooler Line Pinched
Hey Guys,
I have a 99.5 F-250 7.3 4x4
During a very frustrating install of a new 4" down-pipe, i accidentally pinched the upper ZF6 cooler line right at the connection to the transmission.
The soonest i can get a replacement line looks like 2-3 day from now.
I started the truck and drove it around the block, the line is not leaking, but its hard to imagine any amount of fluid is getting by the pinch.
Heres the question, do you think i would be drivable to go to and from work for a few days while i wait on the replacement part?
Its about 12 miles to and from my jobsite.
Thoughts?
Thanks
-HP
I have a 99.5 F-250 7.3 4x4
During a very frustrating install of a new 4" down-pipe, i accidentally pinched the upper ZF6 cooler line right at the connection to the transmission.
The soonest i can get a replacement line looks like 2-3 day from now.
I started the truck and drove it around the block, the line is not leaking, but its hard to imagine any amount of fluid is getting by the pinch.
Heres the question, do you think i would be drivable to go to and from work for a few days while i wait on the replacement part?
Its about 12 miles to and from my jobsite.
Thoughts?
Thanks
-HP
Thread
Thread Starter
Forum
Replies
Last Post
puman
Clutch, Transmission, Differential, Axle & Transfer Case
1
Aug 17, 2016 10:14 AM
nitro3421
1999 - 2003 7.3L Power Stroke Diesel
32
Apr 28, 2012 09:26 PM
427 fordman
Clutch, Transmission, Differential, Axle & Transfer Case
2
Dec 30, 2009 12:32 PM
