Loud clicking after replacing ball joints and tie rods
Thread Starter
|
1st Gear
Joined: Aug 2022
Posts: 1
Likes: 0
Loud clicking after replacing ball joints and tie rods
Hi new member here. Not sure if posting in the right area.
I have a 91 explorer 4wd (automatic locking hubs).
Just replaced upper and lower ball joints, inner and out tie rods, had to disassemble hub assembly.
Now that it's all back together there is a loud clicking on the passenger side.
Cannot figure it out. Has anyone experienced this? Any advice appreciated TIA.
I have a 91 explorer 4wd (automatic locking hubs).
Just replaced upper and lower ball joints, inner and out tie rods, had to disassemble hub assembly.
Now that it's all back together there is a loud clicking on the passenger side.
Cannot figure it out. Has anyone experienced this? Any advice appreciated TIA.
Thread
Thread Starter
Forum
Replies
Last Post
szotty
1999 - 2003 7.3L Power Stroke Diesel
17
Oct 7, 2013 05:46 PM
fordfisherman
Brakes, Steering, Suspension, Tires, & Wheels
1
May 2, 2004 09:26 PM
