When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Put a gdp piping kit and it has no where to plug the charge airflow sensor into so I am throwing that code and my system, especially at the exhaust sounds like a hair dryer or fan running all the time. How can I turn it off. Do I have to get my ezlynk tuner technician to turn it off. Will that fix that sound.
Put a gdp piping kit and it has no where to plug the charge airflow sensor into so I am throwing that code and my system, especially at the exhaust sounds like a hair dryer or fan running all the time. How can I turn it off. Do I have to get my ezlynk tuner technician to turn it off. Will that fix that sound.
Are you talking the IAT (intake air temp) sensor that sits on the cold air pipe coming out of the intercooler?
yes. I ended up shortening that pipe to integrate with the oem part that attaches to the intercooler and joined them together with a boot so I could keep the sensor.
yes. I ended up shortening that pipe to integrate with the oem part that attaches to the intercooler and joined them together with a boot so I could keep the sensor.
I saw a video on Smeding Diesel's intake piping kit and they didn't have a port for the IAT sensor either. The guy ended up zip tying it to one of the small coolant hoses that run on top of the radiator.