'47 G, any information?
Thread Starter
|
Mountain Pass
Joined: May 2017
Posts: 231
Likes: 11
'47 G, any information?
Hi, I posted on the 48-56 forum.
I thought I would try here too.
Can anyone tell me about this engine and drive line?
the trans is a 3 speed
looks like head gasket issues?
I thought I would try here too.
Can anyone tell me about this engine and drive line?
the trans is a 3 speed
looks like head gasket issues?
Fleet Mechanic
Joined: Sep 2007
Posts: 1,412
Likes: 23
From: East Wenatchee
Thread Starter
|
Mountain Pass
Joined: May 2017
Posts: 231
Likes: 11
Hi,
I have two inline flathead engines, one is a '47 G series with a cast BH, clutch, 3speed side loader, and torque tube.
The other engine is a '49 H series, no drive line.
Will the '47 drive line fit the '49 without major surgery?
I have two inline flathead engines, one is a '47 G series with a cast BH, clutch, 3speed side loader, and torque tube.
The other engine is a '49 H series, no drive line.
Will the '47 drive line fit the '49 without major surgery?
Fleet Mechanic
Joined: Sep 2007
Posts: 1,412
Likes: 23
From: East Wenatchee
There is a lot of discussion on this subject here:
https://www.ford-trucks.com/forums/1...-head-six.html
Thread
Thread Starter
Forum
Replies
Last Post
juancho_uy
Ford Inline Six, 200, 250, 4.9L / 300
8
Jun 24, 2018 02:15 PM
Vijay
General Automotive Discussion
14
Apr 4, 2014 09:39 PM
Unfairlane62
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
6
Feb 2, 2006 02:43 PM
