99 Expedition Transfer case
Thread Starter
|
New User
Joined: May 2017
Posts: 5
Likes: 0
99 Expedition Transfer case
Hello thank you for having me on the forum.
I have a 99 Eddie Bower edition and I was driving down the road then all of a sudden it at a stop light it wouldn't move. I can hear it changing gears but it will not engage. I had a guy come hook up his computer and he said it was the transfer case. I was wondering if I need to replace the entire transfer case or can I just get a new motor or maybe something came loose? When I looked under the truck it looks like the drive line is slipped out about a 1/4" any suggestions???
Thank you
I have a 99 Eddie Bower edition and I was driving down the road then all of a sudden it at a stop light it wouldn't move. I can hear it changing gears but it will not engage. I had a guy come hook up his computer and he said it was the transfer case. I was wondering if I need to replace the entire transfer case or can I just get a new motor or maybe something came loose? When I looked under the truck it looks like the drive line is slipped out about a 1/4" any suggestions???
Thank you
Thread Starter
|
New User
Joined: May 2017
Posts: 5
Likes: 0
Thank you
I'm going to have it pulled and open it up. I'm hoping that I can just fix it. I don't want to have too get a new one. How hard are they to pull? Do I need a transmission jack to safely lower it? I've worked on plenty of engines but never this before.
Fleet Owner
Joined: Apr 2008
Posts: 24,319
Likes: 5,128
From: 0,0,1
Anyway, here is the procedure so you can see what to do.
Thread
Thread Starter
Forum
Replies
Last Post
jakvisualdesign
1997 - 2006 Expedition & Navigator
1
Feb 28, 2016 08:28 PM
Doowop
Clutch, Transmission, Differential, Axle & Transfer Case
1
Feb 14, 2005 12:37 PM
tw
1997 - 2006 Expedition & Navigator
2
Jan 11, 2003 04:43 PM
