1/2 my guage cluster wont light up.
Thread Starter
|
Elder User
Joined: Aug 2000
Posts: 597
Likes: 0
From: Burke VA
1/2 my guage cluster wont light up.
Hey all,
So the left side (as you face it) wont light up at all. Replaced the bulbs, switched out little black sockets, nothing. Circuit board? Wires? Black magic? Al Qaeda?
Not sure which of those is the gremlin...
So the left side (as you face it) wont light up at all. Replaced the bulbs, switched out little black sockets, nothing. Circuit board? Wires? Black magic? Al Qaeda?
Not sure which of those is the gremlin...
Hotshot
Joined: Apr 2009
Posts: 14,333
Likes: 247
From: Stanley, VA
Have you tried cleaning the contacts on the circuit board? An eraser does a good job.
Look for breaks in the copper traces on the printed circuit. If you find one, it can be repaired by using a rear window defroster repair kit. It contains a conductive liquid that you brush on, over the break.
Look for breaks in the copper traces on the printed circuit. If you find one, it can be repaired by using a rear window defroster repair kit. It contains a conductive liquid that you brush on, over the break.
Thread
Thread Starter
Forum
Replies
Last Post
Frieghtlinerdriver
2004 - 2008 F150
1
Nov 8, 2013 07:30 AM
widgetsmama
1973 - 1979 F-100 & Larger F-Series Trucks
12
Jul 26, 2012 11:50 AM
