2003 van
Thread Starter
|
New User
Joined: Sep 2007
Posts: 2
Likes: 0
2003 van
Hey guys I need some help.
I have a 2003 e350 van with a 5.4. One of my plugs blew out so I pulled the motor had both heads checked and repaired. Put in all new parts except pistons, rods, crank and cams. Now the engine runs but its idled very high in park. When in gear it seems to run at normal rpm. I have not driven it much but no codes has popped.
What did I do wrong or miss? Vaccume line, sensor? I feel real good about the timing. As I said its a van and everyting is crammed in.
Ghanks
I have a 2003 e350 van with a 5.4. One of my plugs blew out so I pulled the motor had both heads checked and repaired. Put in all new parts except pistons, rods, crank and cams. Now the engine runs but its idled very high in park. When in gear it seems to run at normal rpm. I have not driven it much but no codes has popped.
What did I do wrong or miss? Vaccume line, sensor? I feel real good about the timing. As I said its a van and everyting is crammed in.
Ghanks
Thread
Thread Starter
Forum
Replies
Last Post
IDIDieselJohn
1968-Present E-Series Van/Cutaway/Chassis
2
Feb 23, 2023 11:15 AM
tored1971
1968-Present E-Series Van/Cutaway/Chassis
5
Mar 24, 2008 10:31 AM
