Titan Tank Installation - VIDEO
Thread Starter
|
Post Fiend
Joined: Apr 2004
Posts: 5,158
Likes: 35
From: North of Salt Lake City
Titan Tank Installation - VIDEO
Here you go fellas, in HD if you have the bandwidth:
YouTube - 2011 Ford Super Duty Titan Fuel Tank Installation
YouTube - 2011 Ford Super Duty Titan Fuel Tank Installation
Super Moderator
Joined: Aug 2003
Posts: 25,479
Likes: 742
From: Isanti, MN
Haha, maybe. But mine's worse! 
I only said that because I've heard that it's possible to stress the pumpkin and cause minor leaks by jacking it from the center like that. Never seen it done, just have heard stories...
I only said that because I've heard that it's possible to stress the pumpkin and cause minor leaks by jacking it from the center like that. Never seen it done, just have heard stories...
Fleet Mechanic
Joined: Feb 2010
Posts: 1,446
Likes: 28
From: Hot Springs
Epic very cool! You wanna help me install mine? Did the ground clearance decrease any? How about a skid plate?
Trending Topics
Thread Starter
|
Post Fiend
Joined: Apr 2004
Posts: 5,158
Likes: 35
From: North of Salt Lake City
Come on up to Utah! Bet we could do it in 70 minutes! Didn't think to measure before and after but it hangs down a good 3 - 4 inches or so. Skid plate is on it. It's just another layer of plastic really. Wraps up and around the tank about 3 inches.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
10 Most Surprising 2026 Ford Truck Features!
Joe Kucinski
Thread Starter
|
Post Fiend
Joined: Apr 2004
Posts: 5,158
Likes: 35
From: North of Salt Lake City
It would be a major mod. You'd have to extend the vertical members that attach to the truck and probably bend them to fit around the larger tank anyway. And it's too short, it would only cover the back 2/3rds of the new tank. Ricatic and I were musing over the possibility of making our own. A nice sheet of 1/8th inch aluminum custom cut and bent to fit wouldn't be that big of a deal.
Fleet Mechanic
Joined: Feb 2010
Posts: 1,446
Likes: 28
From: Hot Springs
Could you post a side shot pic of the truck when you get the chance to get an idea on how low it hangs down... Your gonna enjoy that new tank for sure seeing that we got rooked on the small tank in the 1st place huh?
