460 Coil Selection??
#1
#4
heard good things about the street fire but really... the coil is basically the "dumbest" part of the ignition. Wires, plugs, plug indexing, distributor, msd unit..... etc, this is where you will make or break your spark. A good coil is a good coil so im sure they are all comparable over a stock unit. IMHO...for a stock motor, a stock coil is just fine anyway.
#5
heard good things about the street fire but really... the coil is basically the "dumbest" part of the ignition. Wires, plugs, plug indexing, distributor, msd unit..... etc, this is where you will make or break your spark. A good coil is a good coil so im sure they are all comparable over a stock unit. IMHO...for a stock motor, a stock coil is just fine anyway.
#6
+1 Any "good" coil should be fine on a street motor.
FYI, I've used the Street Fire line of parts in my last couple of projects including my F350. Good stuff for the price. I've also ran an Accel coil in my Mustang II for about 15 years now so I know they'll last.
FYI, I've used the Street Fire line of parts in my last couple of projects including my F350. Good stuff for the price. I've also ran an Accel coil in my Mustang II for about 15 years now so I know they'll last.
#7
Trending Topics
#8
After some other research... I decided to go with the MSD High Performance (Blaster TFI) 8227. Some of the MSD stuff is made in China now. Like most of the Street Fire stuff. The more expensive MSD coil is still made in the USA. Gotta be better quality. I have the new distribtor cap already... just need to find a good set of wires tomorrow.
Thread
Thread Starter
Forum
Replies
Last Post
joe f350
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
14
06-20-2011 08:06 AM
FordMan2
1973 - 1979 F-100 & Larger F-Series Trucks
14
07-26-2007 08:07 PM