what rear end?
Thread Starter
|
Senior User
Joined: Oct 2001
Posts: 187
Likes: 0
From: Maryland
what rear end?
I now have 3.08 rear ends in my truck with a 4 speed i want to put at least 3.55 in it. I got two questions question one what is the diffrence between 3.08-3.55-3.73-4.10 and not just that one is higher than the other Also about how mcuh more power will it give me?
Freshman User
Joined: Feb 2003
Posts: 27
Likes: 0
what rear end?
Lower gears (higher number) will improve your rear wheel torque.
Torque is multiplied through your ratio. So whatever torque your getting once it has passed through your tranny - it will be multiplied by your rear end gear ratio. I wouldn't go to 4.10s if you have stock tires cause your gas mileage will hurt due to pretty high revves going down the highway.
Torque is multiplied through your ratio. So whatever torque your getting once it has passed through your tranny - it will be multiplied by your rear end gear ratio. I wouldn't go to 4.10s if you have stock tires cause your gas mileage will hurt due to pretty high revves going down the highway.
Thread
Thread Starter
Forum
Replies
Last Post
FordDrvr
Clutch, Transmission, Differential, Axle & Transfer Case
21
Jul 22, 2003 11:30 PM
