H-D Supercharger Pullys-Needed
Thread Starter
|
New User
Joined: Feb 2003
Posts: 2
Likes: 0
H-D Supercharger Pullys-Needed
Does anyone know where I can get a 8.47" lower pully for my 2002 H-D 5.4L? My local hot rod guy says this will work best with the air intake and chip mods I'm planning. (He also said there is a 9" available that will boost +6 P.S.I., but he warned he has heard of rod failure ustng this much). Coments/suggestions?
Thanks,
JJBoyd
Thanks,
JJBoyd
Post Fiend
Joined: Jan 1997
Posts: 23,165
Likes: 18
From: Enjoying the real world.
H-D Supercharger Pullys-Needed
Click "Online Store" on the top-right and then go to the section with the race flag. You'll see the pulley you want there. Do not run that truck with a pulley unless the chip is programmed for it.
Senior User
Joined: Nov 2002
Posts: 168
Likes: 0
From: Brentwood TN
H-D Supercharger Pullys-Needed
You are pretty much crazy if you go with anything more than 6lbs over stock. I think that is pushing the envelope. If you want to keep your truck safe and conservative go with 4lbs over stock.
Thread
Thread Starter
Forum
Replies
Last Post
Boxersrule
Lightning, Harley-Davidson F-150, Roush F-150 & Saleen F-150
7
Jan 24, 2012 01:41 PM
jimjima67
Lightning, Harley-Davidson F-150, Roush F-150 & Saleen F-150
3
Dec 10, 2002 07:57 AM
