200 bucks.
Today's buy
Thread Starter
|
Hotshot
Joined: Jan 2007
Posts: 11,564
Likes: 4
From: Tucson
even the nuts that bolt them down! and i have a set of ranger seat brackets already.
the guy who plasma cut my caliper brackets is going to cut me some more seat brackets..... just need to find someone whit a press to bend them.
the guy who plasma cut my caliper brackets is going to cut me some more seat brackets..... just need to find someone whit a press to bend them.
New User
Joined: Sep 2012
Posts: 2
Likes: 0
Trending Topics
Thread Starter
|
Hotshot
Joined: Jan 2007
Posts: 11,564
Likes: 4
From: Tucson
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
Thread Starter
|
Hotshot
Joined: Jan 2007
Posts: 11,564
Likes: 4
From: Tucson
Yep! took 2 years to find one...
I was able to find the console through Ron @ Northwest Falcon's, he is retired and had got rid of most everything he had for falcons when i explained to him about how the ranger truck console was cut different to fit the floor of a truck he said he thought he had one! after he checked his storage unit he sent me pic's of what i believe to be an original box.... with out the chrome trim, Dangit! took another year to find that! i used SEM vinyl and plastic paint and its now satin black
I was able to find the console through Ron @ Northwest Falcon's, he is retired and had got rid of most everything he had for falcons when i explained to him about how the ranger truck console was cut different to fit the floor of a truck he said he thought he had one! after he checked his storage unit he sent me pic's of what i believe to be an original box.... with out the chrome trim, Dangit! took another year to find that! i used SEM vinyl and plastic paint and its now satin black
Freshman User
Joined: Jul 2012
Posts: 40
Likes: 0
Hey Bill, I'm slow about getting onto these sites. You think they would be OK with me advertising my Headliners on this site? I asked the moderator about them, haven't had a respone from him yet. Just went international with them today. Shipped one to Willingham, WA today. Guy from Canada will be driving down too pick it up and install it before heading back, I'd bet.
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 785
From: Simi Valley, CA
Most of the console parts are the same as 1964/65 Falcon Sprint, but the Falcon console base has a cutout for the trans hump.
Some of the console parts have been reproduced, available from Dearborn Classics (dearbornclassics.com) located in Bend OR
Call 800-252-7427, ask for a free catalog.
Some of the console parts have been reproduced, available from Dearborn Classics (dearbornclassics.com) located in Bend OR
Call 800-252-7427, ask for a free catalog.
