divorced doubler
Thread Starter
|
Junior User
Joined: Mar 2008
Posts: 68
Likes: 0
divorced doubler
I did a search and didn't really find much but i was wondering if any body had ever built a divorced doubler. I currently have a divorced 205 and would like to make it a doubler. i know i would have to find a divorced 203 and i already have a married 205 but wanted to findout if there was anybody else who had any experince doing this.
Lead Driver
Joined: May 2000
Posts: 9,236
Likes: 12
From: Senoia, GA
your biggest issue doing this is going to be space. unless you have a long wheel base (which in and of itself is a disadvantage) you driveshafts may suffer from extreme angles.
what rig are you working on?
may i ask why you wanna do a divorced setup? finances? just wondering so we can help you better
EDIT: here is someone who has done it with pics:
http://www.s10forum.com/forum/f222/b...n-done-405598/
-cutts-
what rig are you working on?
may i ask why you wanna do a divorced setup? finances? just wondering so we can help you better
EDIT: here is someone who has done it with pics:
http://www.s10forum.com/forum/f222/b...n-done-405598/
-cutts-
Thread Starter
|
Junior User
Joined: Mar 2008
Posts: 68
Likes: 0
well i have a long bed f350 single cab and like i said it already has a divorced 205 in it and i have great drive shaft angles. i feel like i need more gear reduction than the 5.38 is giving me so i thought a doubler would be good. the jack shaft between the c6 and 205 is 20 inches long so i have the room. I would like to keep the angles like they are thats why i like the idea of a divorced doubler
Thread
Thread Starter
Forum
Replies
Last Post
marcveinotte
Clutch, Transmission, Differential, Axle & Transfer Case
1
Nov 28, 2004 02:04 AM
