computer for 351 swap
Thread Starter
|
Posting Guru
Joined: Apr 2002
Posts: 1,102
Likes: 0
From: Back where I started...
computer for 351 swap
This may not be the correct forum for this topic, so I'll apologize in advance, but.... I'm looking at swaping my 300 for a 351, and since I'm gonna keep it EFI, I'm gonna need a 351 computer, correct? If that is the case, will buying a performance chip work instead of getting the right computer from a junkyard or wherever; in other words is a performance chip a whole seperate animal from the computer or is it two terms for the same thing. Pardon my ignorance, and thanks for any help.
Robert
Robert
Post Fiend
Joined: Jan 1997
Posts: 23,165
Likes: 18
From: Enjoying the real world.
computer for 351 swap
You need a 351 or 302 computer along with the harness. If the computer isn't the one that matches up with the engine then do a dyno pull with an a/f chart would be needed along with a custom chip. No, a chip and the computer are not the same thing. A chip plugs into the access port on the computer and overrides the stock program.
Thread
Thread Starter
Forum
Replies
Last Post
minnesota4x4
Computer Chips & Tuners
2
Apr 7, 2005 04:04 PM
tobins
Computer Chips & Tuners
5
Oct 31, 2001 01:36 PM
