Any flatbed dents out there?!
#1
Any flatbed dents out there?!
My truck has a bad case of Minnesota cancer. Over half the box side is missing due to rust. I found a few flatbeds that I like for a cheap and easy fix till I get a box. Any of you guys got flatbeds on your dents? Could you post a few pics? Here's the one I found that I like....
#3
I've got pics of mine in my garage... Not sure how to post it other than uploading to an outside site, and don't want to do that ATM.
It's not completely done, but it gives you an idea... And this was fab'd by a friend of mine. Cost me $500 including labor for the frame, and IIRC about another $140 for the lumber.
It's not completely done, but it gives you an idea... And this was fab'd by a friend of mine. Cost me $500 including labor for the frame, and IIRC about another $140 for the lumber.
#5
#6
#7
Trending Topics
#8
here's my 77 350 dually, stretched frame, with a 400.
f350 dentside pictures by autoiknow09 - Photobucket
that bumper is around 350lbs, also shows what it looked like when I first bought it.
f350 dentside pictures by autoiknow09 - Photobucket
that bumper is around 350lbs, also shows what it looked like when I first bought it.
#9
here's my 77 350 dually, stretched frame, with a 400.
f350 dentside pictures by autoiknow09 - Photobucket
that bumper is around 350lbs, also shows what it looked like when I first bought it.
f350 dentside pictures by autoiknow09 - Photobucket
that bumper is around 350lbs, also shows what it looked like when I first bought it.
#10
I can see the points where they at one time welded in a new section of frame. that truck is about 19 feet long at the back fo the bed.
if you look at the picture of the truck. in front of the front leaf spring mount there is a cut and welded spot. you can just see the 2 welds on the frame Im not sure if they stretched it or if they just replaced the section with a non bent piece so they could put the bed on.
http://i969.photobucket.com/albums/a...e/DSCF0684.jpg
if you look at the picture of the truck. in front of the front leaf spring mount there is a cut and welded spot. you can just see the 2 welds on the frame Im not sure if they stretched it or if they just replaced the section with a non bent piece so they could put the bed on.
http://i969.photobucket.com/albums/a...e/DSCF0684.jpg
Last edited by jack90; 08-21-2010 at 10:44 PM. Reason: added picture link
#11
I can barley even tell if there is a flatbed on that truck
That first is HD! Really like the new one. That's kinda what I'm going for om my truck.
I really like that blue truck. First saw it on pirate4x4. To bad he cut the frame to make the flatbed nice and low.
Definitely different. Almost has a old hot rod look to it.
Definitely different. Almost has a old hot rod look to it.
#14