Transfer Case Shifter Question
Thread Starter
|
Freshman User
Joined: Aug 2002
Posts: 49
Likes: 0
From: SOUTH TEXAS
Transfer Case Shifter Question
Ok Guys. Try and answer this one. I have a 1975 F-250 4x4 with 360, 4speed Manual Tranny and a NP 203 Transfer Case. Due to stupidity on my part. I damaged the NP 203 Shifter and Linkage. Now the hard part. Is the Shifter and Linkage for the NP 203 different on the trucks with an Automatic Tranny ?
Senior User
Joined: Jan 2003
Posts: 120
Likes: 0
From: West Kentucky
Transfer Case Shifter Question
I thought I was going to need a new shifter for my 203 last summer. Looked around a little, couldn't find anything. You would think that somebody would make an aftermarket shifter somewhere. Just cleaned mine up and tightened it up real good, works fine now. Is their any manufactuer out their that makes aftermarket shifters? Not sure either on the compatibility between manual and automatic shifters either HBINGER. Sure ya can't salvage yours out?
Thread Starter
|
Freshman User
Joined: Aug 2002
Posts: 49
Likes: 0
From: SOUTH TEXAS
Transfer Case Shifter Question
I tried fixing it. But just made it worse. We were moving the truck with the engine and tranny removed. And just had the T Case Shifter tied up to support it. With knowing it the Shifter fell. And when I pulled it foward. The Rods were turned into pretzels. The Shifter is more like an "L". Have found one in Kansas. But it came off the same with an automatic.
