need help asap
Thread Starter
|
New User
Joined: Oct 2009
Posts: 19
Likes: 0
need help asap
Hey guys, I need some help. I have a 2005 e-350 with the 6.0. Was wondering if anyone would know how to or know where I can find the info on removing the a/c compressor pulley. I got a new one to put on, but cant seem to get the old one off. Anyone that has worked on one of these vans knows you cant see crap to work on it. I cant tell if there is a snap ring or not. I looked it up on fordparts.com but it doesnt show a snap ring to the outside. Please help.
Thread Starter
|
New User
Joined: Oct 2009
Posts: 19
Likes: 0
well, i found whats holding me up. There is a snap ring that holds it on. No special puller required on these. Its a different compressor than on the trucks, but thanks for the advice. I finally found the snap ring ends, but my snap ring pliers wont get it off. Have to wait til the morning to get a set that are a bit longer.
Thats a nice looking truck in your avatar. I just looked at a 2007 today. If the bank will let me, im going to go back and get it. cc, sb, 4x4 with only 38k miles.
Thats a nice looking truck in your avatar. I just looked at a 2007 today. If the bank will let me, im going to go back and get it. cc, sb, 4x4 with only 38k miles.
