dumb question time
Thread Starter
|
Elder User
Joined: Sep 2002
Posts: 622
Likes: 0
From: Urbandale, Iowa
dumb question time
I'm going to take the motor mount bolts out and the tranny mount bolt out so I can jack the engine up an inch or so. I need the clearance to work on a snapped bolt.
The question is where to place the floor jack so that I don't break or crack anything....
The question is where to place the floor jack so that I don't break or crack anything....
Elder User
Joined: Jan 2003
Posts: 730
Likes: 0
From: at my house
dumb question time
I usually go under the harmonic balancer with a 2x4 inbetween the jack and it. Also the tranny mount should have enough give without un bolting it. last but not least when ur jacking it up make sure nothing is in the way inbetween the firewall and the bellhousing.
Patrick
1970 F250 CrewCab 4x4 460 C6
Patrick
1970 F250 CrewCab 4x4 460 C6
