Serpentine Belt Path
Thread Starter
|
Senior User
Joined: Oct 2009
Posts: 173
Likes: 0
From: Wisconsin
Serpentine Belt Path
I am getting ready to replace my serpentine belt as preventative maintenance. I was looking at the belt path and noticed that the actual belt path does not match the belt path on the sticker under the hood. My assembly has one less pulley than what is shown on the sticker. On the sticker there is a pulley just to the lower left of the alternator that is backwrapped. I do not have this pulley.
Anyone else notice this? Am I missing a pulley, or did a previous owner remove it and use a different belt? There still seems to be plenty of belt wrap around the alternator pulley and the truck runs great, so I assume everything is ok. I just thought I would throw it out there.
p.s. - my current belt is 3C3E-8620-DA
Thanks!
Anyone else notice this? Am I missing a pulley, or did a previous owner remove it and use a different belt? There still seems to be plenty of belt wrap around the alternator pulley and the truck runs great, so I assume everything is ok. I just thought I would throw it out there.
p.s. - my current belt is 3C3E-8620-DA
Thanks!
Fleet Owner
Joined: Nov 2003
Posts: 27,900
Likes: 3,617
Thread
Thread Starter
Forum
Replies
Last Post
Big Skier
1967 - 1972 F-100 & Larger F-Series Trucks
31
Feb 27, 2019 07:21 AM
pipman76
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
1
Sep 5, 2009 05:43 PM
SPL Tech
Excursion - King of SUVs
24
Jan 15, 2007 12:40 PM
