1967 - 1972 F-100 & Larger F-Series Trucks Discuss the Bumpsides Ford Truck

Header help

Reply Subscribe

Search this Thread

Old

Jul 6, 2010 | 02:15 PM

#1

sleep_deprived129

Thread Starter

|

Senior User

Joined: May 2007

Posts: 218

Likes: 1

From: Everett, WA

Header help

I have a 1970 F-100 with a 302 attached to a c-4. I recently replaced the transmission and now my driver's side header is hitting the frame at the collector ring. Any ideas how to remedy this, short of buyin a better fitting set of headers? Is it possible to perhaps put a small spacer/shim in at the motor mount? I have tried shifting the motor around on the mount towers but without much, if any change to the problem. Thanks for any help.

Reply

Old

Jul 7, 2010 | 12:51 AM

#2

jmoran

New User

Joined: Jun 2007

Posts: 6

Likes: 0

now dont quote me on this but i think shimming the motor mounts will throw off the pinon angle of ur driveshaft causing vibrations.

GO AZTECS

Reply

Old

Jul 7, 2010 | 06:58 AM

#3

4x4jedi

Senior User

Joined: Sep 2009

Posts: 384

Likes: 1

It won't throw off the pinion enough to change anything. I would shim it. Just a piece of quarter inch plate would probably do the trick.

Reply

Old

Jul 7, 2010 | 08:35 AM

#4

bmuhlbach

Cargo Master

Joined: Dec 2006

Posts: 2,511

Likes: 8

From: hinckley ohio

put a jack handle or spud bar in the header and pull it away from the cross member you can tweak them some to clear things.

Reply

Reply Subscribe

Tags

ford, headers, truck

Thread Tools

Search this Thread

Show Printable Version

Show Printable Version

Email this Page

Email this Page

Reply Share

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 06:08 AM.