River city EGR?
Mountain Pass
Joined: Nov 2008
Posts: 159
Likes: 0
I just put one on last week, RCD. The only problem was that the hose piece for the connection to the oil cooler was to short. It needs to be about three inches long, minimum, and theirs was only about two. Had to take an hour to go get a longer piece of silicon hose at about a dollar an inch, jminimum one foot. Also it doesn't line up just right. It is slightly lower than the connection on the olil cooer. It does go on with a little bend in the hose. Outside of that it was pretty straight forward. I would however go to the sinister sight, MKM I think, and download their instructions. Theirs are more detailed and in color. I was going to get the Sinister kit but the RCD came along at a better price.
Hope this helps.
Hope this helps.
Senior User
Joined: May 2009
Posts: 403
Likes: 0
From: MI
I've read on a couple of sites that RCD originated that style of kit and that the sinister kit is a knock off. Not sure if it's true but the main point is that I believe they are similar kits.
I know I was happy with the quality of the RCD kit and it went on without issue.
I know I was happy with the quality of the RCD kit and it went on without issue.
