BLACKSTONE OIL ANALYSIS
#1
BLACKSTONE OIL ANALYSIS
Just curious what some opinions might be.
Recent OA from Blackstone says an almost perfect OA except for the fuel in oil at <2.0%. In the past OA's it has been <0.5%.
Is this a dangerous level? I know fuel in the oil is not good.
Sample was tested at 362,594 miles with 5100 miles on the sample using Rotella T Synthetic.
Should I start looking at injector work?
Thanks guys
Recent OA from Blackstone says an almost perfect OA except for the fuel in oil at <2.0%. In the past OA's it has been <0.5%.
Is this a dangerous level? I know fuel in the oil is not good.
Sample was tested at 362,594 miles with 5100 miles on the sample using Rotella T Synthetic.
Should I start looking at injector work?
Thanks guys
#2
I had an OA done last year and mine showed over 4% fuel. Ford considers 5% contaminated to the point have having to do the injector seals. I did that and no more fuel in the oil.So at over 2% you might want to think about doing this job in the near future.Besides, you get better milage with the fuel going into the cylinder instead of the oil.Roy
Thread
Thread Starter
Forum
Replies
Last Post
dmueller71
1999 - 2003 7.3L Power Stroke Diesel
2
12-13-2012 10:47 PM
dmueller71
1999 - 2003 7.3L Power Stroke Diesel
2
12-01-2009 09:06 PM