Some specs for a 262 engine
#1
Some specs for a 262 engine
I want to do regular tune up stuff on the engine and need to know a couple of things. If anyone can tell me, I'd sure appreciate it.
1) Recommended spark plug type
2) Recommended spark plug gap - points distributor.
3) Intake rocker to valve clearance - Do I adjust hot or cold?
4) Exhaust rocker to valve clearance - Hot or cold?
Thanks,
David
1) Recommended spark plug type
2) Recommended spark plug gap - points distributor.
3) Intake rocker to valve clearance - Do I adjust hot or cold?
4) Exhaust rocker to valve clearance - Hot or cold?
Thanks,
David
#2
I want to do regular tune up stuff on the engine and need to know a couple of things. If anyone can tell me, I'd sure appreciate it.
1) Recommended spark plug type
2) Recommended spark plug gap - points distributor.
1) Recommended spark plug type
2) Recommended spark plug gap - points distributor.
Champion 860 (or modern equivalent)
Size: 18mm
Spark Plug Gap: 0.028" to 0.032"
Torque: 15-20 foot-pounds
Contact Points Gap: 0.024" to 0.026"
Dwell Angle: 35-38 degrees
3) Intake rocker to valve clearance - Do I adjust hot or cold?
4) Exhaust rocker to valve clearance - Hot or cold?
4) Exhaust rocker to valve clearance - Hot or cold?
Hot Intake Valve Lash: 0.019"
Hot Exhaust Valve Lash: 0.019"
Cold Intake Valve Lash: 0.019"
Cold Exhaust Valve Lash: 0.019"
Setting valve lash while HOT is the preferred method.
Thread
Thread Starter
Forum
Replies
Last Post
devlin12
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
2
08-20-2016 05:23 PM
mpc07005
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
6
07-17-2012 09:09 PM
AbandonedBronco
Ford Inline Six, 200, 250, 4.9L / 300
8
03-20-2011 02:58 PM