PA Chapter's June BS/Chat Thread
FTE Chapter Leader
Joined: Mar 2009
Posts: 33,908
Likes: 244
From: Johnstown, PA
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
FTE Chapter Leader
Joined: Mar 2009
Posts: 33,908
Likes: 244
From: Johnstown, PA
Marshall - one of the guys on here who posts a lot in the 70's trucks forum had or still has a puller that he did that with...it was an 80's truck that he put a 90-something front clip on...think it was a 95. Came out looking good.
Kathy - that's true too...have torch and welder and anything fits...
Kathy - that's true too...have torch and welder and anything fits...
Post Fiend
Joined: Mar 2010
Posts: 9,060
Likes: 0
From: south western pa
Bill the same did a 75 highboy a couple of years ago he took the inner part of the bed from a 95 and wrapped it with 2 70's bedisides and the made to 70's tailgate fit and look good then bought off of ebay a toolbox that went inthe passenger side of the bed cut a big hole out of the new bedside and put the toolbox in and it looks good .
Thread Starter
|
Zombie Survivalist
Joined: Feb 2009
Posts: 14,809
Likes: 3
From: Rock Springs, WY, USA
actually, any F series truck from 80 to about 98 will accept beds, front clips, and cabs. all the body lines and moutin points line up. to do a front clip you have to change the core support though.