Need Help Identifying Sprind Codes
Thread Starter
|
Junior User
Joined: Jan 2010
Posts: 78
Likes: 0
From: VA BCH, VA
Need Help Identifying Sprind Codes
Answers are great, direction pointing is just as good.
I just swapped rear leafs from an F-250 onto my Ex. It gave me about 2in, without removing the stock 2.5in block. Can someone help me figure out which springs I have? The part number in the second picture didn't match up to anything on Partsguyed's page. I also installed the 2.5in skyjacker leveling kit from the same F250(they were used, as a set, GREAT price, Even came with the rims and tires). Without tires it raised the front 4in, the back about 2. Just curious which springs I have, planned on modifying them with some extra leafs to get my two inchs back, but wasn't sure what I was starting with. The new leafs were the ones at the top of the picture. I was surprised to see that it had fewer leafs, but was still stiffer than the stock(both were from vehicles at about 100k.).
I just swapped rear leafs from an F-250 onto my Ex. It gave me about 2in, without removing the stock 2.5in block. Can someone help me figure out which springs I have? The part number in the second picture didn't match up to anything on Partsguyed's page. I also installed the 2.5in skyjacker leveling kit from the same F250(they were used, as a set, GREAT price, Even came with the rims and tires). Without tires it raised the front 4in, the back about 2. Just curious which springs I have, planned on modifying them with some extra leafs to get my two inchs back, but wasn't sure what I was starting with. The new leafs were the ones at the top of the picture. I was surprised to see that it had fewer leafs, but was still stiffer than the stock(both were from vehicles at about 100k.).
