Intercooler parts
Hotshot
Joined: Jul 2003
Posts: 12,177
Likes: 40
From: Newport, WA
I knew it wouldn't be easy, but holy $#!t what a mess on that passenger side. Doesn't mean I won't be doing it... just gonna be more work than I thought!
Senior User
Joined: Oct 2004
Posts: 436
Likes: 0
Keep your eyes peeled. I was able to get a 7.3 IC take-off with 6.0 pipes and a couple boots from craigslist for $80. I installed it. Now I gotta get busy and figure out how to move all the stuff outa the way on the pass. side. I bought the SD cold pipe from Ford. I still don't know if it's gonna bolt in or need mod.
Thread Starter
|
Postmaster
Joined: Jun 2009
Posts: 2,566
Likes: 1
From: Monroe/Ellensburg, WA
<input id="gwProxy" type="hidden"><!--Session data--><input onclick="jsCall();" id="jsProxy" type="hidden">
Fleet Owner
Joined: Aug 2004
Posts: 20,419
Likes: 197
From: AZ
Short and a little out of align up at the top. The double set of boots made up for the alignment problem. I made up a couple of short pipes with a wire welded around the ends to help keep the boots on. It works but some don't think its very professional. Some hotshot at TDS a few years back made a crack about it and I just told him that I wasn't a trust baby like he was! 
Thread Starter
|
Postmaster
Joined: Jun 2009
Posts: 2,566
Likes: 1
From: Monroe/Ellensburg, WA
Alright sweet, so nothing a couple sets of boots and some extension piping wont fix right?
And nice response to that guy! Some people just aren't as fortunate as others. Some people gotta work for it. Shed some blood sweat and tears and lots of hard work.
And nice response to that guy! Some people just aren't as fortunate as others. Some people gotta work for it. Shed some blood sweat and tears and lots of hard work.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Fleet Owner
Joined: Aug 2004
Posts: 20,419
Likes: 197
From: AZ
I'll take a lot at how long the extention pipes are I made and report back tonight. I'm guessing they are four to six inches. I used welding rod (without the instalation of course) around the ends of the pipe, welded and ground it down smooth so the boots would not fly off under my extreme high boost of 70psi, ha ha.
Junior User
Joined: Apr 2006
Posts: 80
Likes: 0
looks like their are at least two of us looking for the same stuff, that does make it a little harder to find i suppose. I know everywhere i have looked, i'm coming up short... I definately want to go with the 6.0 cooler though.
Thread Starter
|
Postmaster
Joined: Jun 2009
Posts: 2,566
Likes: 1
From: Monroe/Ellensburg, WA
And its not too bad to find this stuff, i just want to find it the cheapest i can. I actually know a guy on Ebay that sells direct pipes for our trucks using an early 99 spider but im convinced i can do it cheaper. And with the help of Glenn, if i can scrounge up some SD pipes and maybe have him take a picture of his pipes, i figure i can mod those pipes for 1/4 of the cost of those direct fit pipes on ebay. And local craigslist and junkyards it sounds like will be your friend for finding a 6.oh cooler. It's all out there, you just gotta find it. The hardest part is the spider. But again, its out there.
<input id="gwProxy" type="hidden"><!--Session data--><input onclick="jsCall();" id="jsProxy" type="hidden">
Thread Starter
|
Postmaster
Joined: Jun 2009
Posts: 2,566
Likes: 1
From: Monroe/Ellensburg, WA
Glenn, no worries, Its not a beauty contest, just needs to work. So are those unmodified SD pipes, like no cutting sections out of the middle or anything? They are just SD pipes and some modifying at the boots there with a bunch of clamps? Sorry for all the ?'s, im just trying to get all the info i can. Thanks a bunch for the pictures too!
