trans change compatablity
Thread Starter
|
Junior User
Joined: Nov 1999
Posts: 70
Likes: 0
trans change compatablity
Hello,I have a 94 F250 with 5.8l 4x4.The E4OD trans is shot. I can get a 91 F250 5.8l 4x4 trans for it that has been rebuilt with low miles.Will this trans work? It is my understanding that if it was behind a 351 it would be a E4OD.Thanks for your help.I tried to search for an answer but gave up after about 500 posts that never answered my question.
Postmaster
Joined: Mar 2008
Posts: 2,703
Likes: 7
From: Des Moines, Iowa
It should bolt right up but not sure if there will be computer compatability issues (as I don't know about the electronics on 1991+ Fords). One of my 88's is a C6 Tranny so it could be likely that the rebuild is a C6 also. It will bolt right up though and fit in the E40D's place. I'm sure someone else will chime in on the electronic side...
Postmaster
Joined: Mar 2008
Posts: 2,703
Likes: 7
From: Des Moines, Iowa
if the tranny has a pan on the bottom or looks like the pic/pics below... it's a C6!
http://www.4x4review.com/Portals/1/O...10Trans/c6.jpg
http://www.4x4review.com/Portals/1/O...10Trans/c6.jpg
