When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Well, I got my 6637 yesterday when I got home from school. So I pulled the truck into the shed and put it in. Took me about an hour, but I was very meticulous with wiping down each part. Drove the truck some that night and today. The intake definetly made a difference seems to accelerate quicker and you can hear the turbo more. Great kit Clay! Hopefully will take a few pictures and put them on (if I can figure out how).
Helpful hint - if installing 6637, make sure you take note of which end of the air intake hose attaches to the intake and which one heads toward the turbo. Not sure if it matters with everyone's truck, but sure helped when I swapped ends and quit trying to clamp the smaller end towards the turbo.
I did mine i just clamped it up. Got lucky. When i did my dads, i was like "what the heck it don't sit in there right" Messed with it and messed with it.. Then i found out i had the tube on backwards also.. lol.
Well, I got my 6637 yesterday when I got home from school. So I pulled the truck into the shed and put it in. Took me about an hour, but I was very meticulous with wiping down each part. Drove the truck some that night and today. The intake definetly made a difference seems to accelerate quicker and you can hear the turbo more. Great kit Clay! Hopefully will take a few pictures and put them on (if I can figure out how).
Helpful hint - if installing 6637, make sure you take note of which end of the air intake hose attaches to the intake and which one heads toward the turbo. Not sure if it matters with everyone's truck, but sure helped when I swapped ends and quit trying to clamp the smaller end towards the turbo.
some people dont like magniflow but i got a 4" stainless turbo back system from summit for just under 400 bucks. it was a pretty good kit and stainless is much better.