redneck body work
I ended up jacking up the drivers side of the tub until it looked even with the pass side and adding 4" of washers, shims and anything else I could find in my dad's shop to build up the mount. Once it was "structurally" in shape, I went to work to fill the 2" rusted out gap in the floor and the other various rust holes. Between both sides of the floor and the tunnel, I nearly used up a gallon can of bondo. From the underside, it looked like something you would see in a cave. After I sanded the high spots and hammercoated it, you could hardly tell.
I bought it for $125, put a set of plugs and fresh gas in it (and a gallon of body work in a can) and sold it for $750. That was 15 years ago and as far as I know, that old Scout is still running around here.
I don't have pictures of this mod. It's best not to have evidence like that lying around.

Jason
Jason




