KZ Stonridge 5th wheels
#31
#32
Although the industry has supposedly stopped using Chinese tires, I would encourage you to check. Those tires are absolute garbage (as it most of the stuff I have to use that is made in China). The ones I have seen are worthless in three years or less.
My two cents (based on what I am seeing in the field).
Steve
My two cents (based on what I am seeing in the field).
Steve
#33
Join Date: Mar 2009
Location: North Bay Ont Canada
Posts: 161,148
Received 5,160 Likes
on
1,689 Posts
#34
Steve
#35
Join Date: Mar 2009
Location: North Bay Ont Canada
Posts: 161,148
Received 5,160 Likes
on
1,689 Posts
#36
#37
#38
Join Date: Mar 2009
Location: North Bay Ont Canada
Posts: 161,148
Received 5,160 Likes
on
1,689 Posts
#39
On our 2008 KZ, at about 15,000 miles lost one tire and tore up underbody and outer skirt, out of the other 5 tires only one was still round, others coming apart.
Forgot myself and told the tire guy that if the one was still good, I wanted to keep it.
Thought he was going to slap me.
Forgot myself and told the tire guy that if the one was still good, I wanted to keep it.
Thought he was going to slap me.
#40
#41
Join Date: Mar 2009
Location: North Bay Ont Canada
Posts: 161,148
Received 5,160 Likes
on
1,689 Posts
#42
Well, been doing a bunch of searches, I had called the sales guy and asked him over the phone what they were. I don't think he really knows because I cannot find anything on them. Finally found this website and they are not listed here either:Tire Brands and Makers
So I am gonna have to look at them myself so I can figure out what they are. If I can't then we are gonna have an issue.
So I am gonna have to look at them myself so I can figure out what they are. If I can't then we are gonna have an issue.
#43
Well, been doing a bunch of searches, I had called the sales guy and asked him over the phone what they were. I don't think he really knows because I cannot find anything on them. Finally found this website and they are not listed here either:Tire Brands and Makers
So I am gonna have to look at them myself so I can figure out what they are. If I can't then we are gonna have an issue.
So I am gonna have to look at them myself so I can figure out what they are. If I can't then we are gonna have an issue.
I spend considerable time redoing underbelly, water and gas lines, and forming up new body panels, when a tire blows.
Steve
#44
#45
But I did recall my conversations on here a few years back....and the subject was:
https://www.ford-trucks.com/forums/5...ang-tires.html
https://www.ford-trucks.com/forums/5...ang-tires.html