need brake line help
Hotshot
Joined: Apr 2009
Posts: 14,333
Likes: 247
From: Stanley, VA
I believe it's 3/16" but it may be 1/4". I'm not home right now so I can't run out and look. But be aware that the inverted flare nut at the proportioning valve is an odd size. You will need an adapter line to hook it to the standard line.
Adapter lines are short 6" long lines that have the odd size fitting on one end and the standard fitting on the other. Some parts stores have these in stock but any store should be able to order them.
Adapter lines are short 6" long lines that have the odd size fitting on one end and the standard fitting on the other. Some parts stores have these in stock but any store should be able to order them.
