1972 C-600
Thread Starter
|
New User
Joined: Feb 2010
Posts: 6
Likes: 0
1972 C-600
I'm purchasing a 1972 Ford C-600 dump truck. I already know that it is going to require some work before it is road worthy, like brake cylinders and most likely the master cylinder and hydraulic clutch, as well as some carb work, but it does run, has low miles, good tires and the hydraulic dump bed works without leaking.
I have been searching high and low for any site that would have a shop manual for this truck, or even on online VIN decoder, but haven't had much luck as of yet. Does anyone know where I could find such resources for this truck?
I have been searching high and low for any site that would have a shop manual for this truck, or even on online VIN decoder, but haven't had much luck as of yet. Does anyone know where I could find such resources for this truck?
Elder User
Joined: Aug 2007
Posts: 537
Likes: 0
From: LaGrande,Ore
New owner
Ask numberdummy nicely to decode your vin. Some one here will chime in with suggestions for manuals. As far as individual questions most of us work on our own and have experience. Some more than others but most very willing to help.I've only got 40 years in the trade.so I'm still learning, but others know much more. Just ask.OBCB 
Thread Starter
|
New User
Joined: Feb 2010
Posts: 6
Likes: 0
Re: 1972 C-600
OBCB, I certainly do appreciate the prompt reply! It is nice to know that this is such a responsive forum.
I'll make sure that I'm extra nice to numberdummy, if I ever request his help decoding the VIN. The part about somebody chiming in about manuals sounds encouraging, as well. I do appreciate it, OBCB.
I guess that I could go ahead and post the VIN, right now? Just in case somebody checks this thread and has an interest in decoding it?
C61DVP14861
Thanks, again, OBCB. See you around.
I'll make sure that I'm extra nice to numberdummy, if I ever request his help decoding the VIN. The part about somebody chiming in about manuals sounds encouraging, as well. I do appreciate it, OBCB.
I guess that I could go ahead and post the VIN, right now? Just in case somebody checks this thread and has an interest in decoding it?
C61DVP14861
Thanks, again, OBCB. See you around.
Thread Starter
|
New User
Joined: Feb 2010
Posts: 6
Likes: 0
Re: Ford Master Parts Catalog
Hey, kaj223. Thanks for the info. I checked ebay and didn't see anything for my model year, but I'll keep checking to see if anything is offered. I saw the CD-ROM you were talking about. I searched the seller's other items and didn't see anything for mine. Maybe he'll make that addition in the future? Anyway, thanks for the heads up.
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 784
From: Simi Valley, CA
Originally Posted by Brian One
C61DVP14861
C61 = C600 (gas)
D = 330 2V Heavy Duty FT Engine
V = Kentucky Truck Assembly Plant
P14681 = 1972.
The 1964/72 FORD TRUCK PARTS CATALOG is available on a CD from hipoparts.com for about $22.00.
This catalog has 4,849 pages of text, 1,961 pages of illustrations.
For a used and/or reprint of the factory shop manual, try faxonautolit.com.
btw: Sorry for not chiming in sooner. FTE is a huge site, there's 500,000 + of y'all and one of me. So, I cannot answer everyone's questions when first posted.
Thread Starter
|
New User
Joined: Feb 2010
Posts: 6
Likes: 0
Bill
Bill, thank you for the information. I finally had the truck towed to a location where I can begin to work on it. Thanks, again, for the information. It was very helpful.
Trending Topics
4wd Low
Joined: Jan 2011
Posts: 14
Likes: 0
try this for a station manual covering your truck 1966-1978 Motors Truck & Tractor Repair Manual
and this for a complete 5 volume set on cd Buy Factory Service Manuals Online for your antique and classic car or truck.
this last covers chassis,engine,body,elec,&parts
and this for a complete 5 volume set on cd Buy Factory Service Manuals Online for your antique and classic car or truck.
this last covers chassis,engine,body,elec,&parts
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
10 Most Surprising 2026 Ford Truck Features!
Joe Kucinski
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 784
From: Simi Valley, CA
faxonautolit.com (located in Riverside CA) has used and reprints of Ford factory shop/owners manuals, sales brochures, facts books and etc.
hipoparts.com has the 1964/72 Ford Truck Parts Catalog on a CD.
Newer vehicles: helminc.com has new owners/shop manuals, wiring /vacuum diagrams and etc.
Helm has printed all of Ford's literature for over 50 years.
hipoparts.com has the 1964/72 Ford Truck Parts Catalog on a CD.
Newer vehicles: helminc.com has new owners/shop manuals, wiring /vacuum diagrams and etc.
Helm has printed all of Ford's literature for over 50 years.
Thread Starter
|
New User
Joined: Feb 2010
Posts: 6
Likes: 0
Parts C.D.
Thanks for the information, guys. I've not really checked into this forum, or this section, for a while. You've all provided a lot of good information. Thanks!
I'm finally trying to get serious about performing some repairs on this truck. I just ordered the C.D. catalog from hipoparts.com. I'll take a look at it and then decide if I need to acquire any of the other resources, or not. I'm sure I will. Resources for resources, though. I'll start with this C.D.
Thanks for your help, guys.
I'm finally trying to get serious about performing some repairs on this truck. I just ordered the C.D. catalog from hipoparts.com. I'll take a look at it and then decide if I need to acquire any of the other resources, or not. I'm sure I will. Resources for resources, though. I'll start with this C.D.
Thanks for your help, guys.
Thread
Thread Starter
Forum
Replies
Last Post
