DynaTrac Ball Joints
Thread Starter
|
New User
Joined: Sep 2003
Posts: 15
Likes: 0
DynaTrac Ball Joints
Has anyone used dynatrac prosteer ball joints? If so how do they hold up?
I'm tired of blowing through the best that autozone has to offer, but these are a little pricey to gamble with at $600 for a set...
I'm tired of blowing through the best that autozone has to offer, but these are a little pricey to gamble with at $600 for a set...
Postmaster
Joined: Jan 2005
Posts: 4,424
Likes: 12
From: BC Canada
If its the serviceable ones, hearing good things. Sorry, I have only done Moog on my old 2000, they were good until sale 35,000 later, I think Moog are now getting a less optimistic review, parts are not as good now. If you are getting them done ask how many and how many come backs, how well they last, if they recomend these vs another. Go somewhere they do lots and make sure you get the 0 rings for the ESOF done if you have ESOF.
Thread Starter
|
New User
Joined: Sep 2003
Posts: 15
Likes: 0
Yeah, these are supposed to be servicable... I'm installing them myself.
I looked at the moog "problem solver" ball joints but they appear to be the same construction as the duralast.
The problem I have is that I'm running 38" tires and a big lift, so lots of tire and it rides like an old tank, so those ball joints take a beating
I looked at the moog "problem solver" ball joints but they appear to be the same construction as the duralast.
The problem I have is that I'm running 38" tires and a big lift, so lots of tire and it rides like an old tank, so those ball joints take a beating
Thread
Thread Starter
Forum
Replies
Last Post
caedo
1999 - 2003 7.3L Power Stroke Diesel
11
Jun 2, 2014 11:59 PM
