4X4 Problems
Thread Starter
|
Freshman User
Joined: Dec 2006
Posts: 28
Likes: 0
4X4 Problems
Where can I get some info on the front axel. My auto hubs are acting up and the Pluse switch (vacum switch )doesn't seem to be working. My transmision sticks in 4 low I have to go under and wack the sylnoid with a hamer to get it out of 4 low.
Thread Starter
|
Freshman User
Joined: Dec 2006
Posts: 28
Likes: 0
I have already trouble shot the Vacum system and the vacum switch or you could call it a vacum solinoid or even what hins calls it a pluse silanoid. the right hub will also not hold a vacum and with booth vacum lines caped off at the hubs and a vacum pume hooked up to the vacum solinoid ( in put side) the pump can not draw a vacum take the lines off the other side of the solinoid and the pump will draw a vacum. Hok the pump to the wheels directly the left will hold a vacum and the right not so much ( thats an o riing i think)(i hope) the transfer case shifting proble is the rough one
