What Have YOU Done To Your Truck Today?
The following 6 users liked this post by 73 hi-boy 428 fe:
3G install started but ran in to a problem. The alternator is the large case size.
Did not notice till all the alternator parts were out. Once I got the original alternator out,
I could see the difference. Not going to put it all back. The problem is the bottom
bracket hits the larger alternator case when trying to tighten the belt.
Ordered a different lower mounting bracket. Should be here Monday I hope.
I got new LED’s for my dash.
Painted all the needles fluorescent Red
Installed the RocketMan voltage Gauge.
Hope to get the alternator done tomorrow or next weekend weather permitting.
Did not notice till all the alternator parts were out. Once I got the original alternator out,
I could see the difference. Not going to put it all back. The problem is the bottom
bracket hits the larger alternator case when trying to tighten the belt.
Ordered a different lower mounting bracket. Should be here Monday I hope.
I got new LED’s for my dash.
Painted all the needles fluorescent Red
Installed the RocketMan voltage Gauge.
Hope to get the alternator done tomorrow or next weekend weather permitting.
The following 4 users liked this post by FiddlyThings:
This was the old cattle catcher. Home made by someone a long time ago. Found a bumper, but is had some extra holes torched in it, and the bolt holes were all wallowed out. Just welded up the holes, ground off the flaking chrome, and rust. Welded some mounts right to the bumper. Planning on just painting it when I plaint the truck.
Not a word about the "lawn".
The following users liked this post:
The following users liked this post:
The following 2 users liked this post by SlikWillie: